My scanner arrived today.
Had a quick play, given my cold start miss issues interestingly my DTC's are;
Code: P0340
Camshaft Position Sensor (Cylinder Identification) (
CMP) <CID> circuit malfunction DTC P0340 is reported if the
CMP or its circuit have malfunctioned.
Code: P0350
Ignition coil failure DTC P0350 is reported if there is an failure of an undefined ignition coil or circuit - Reading further into this one ... ELECTRICAL CONDITION - coil signal shorted to ground, Vehicle Power (VPWR) or Signal Return (SIGRTN), coil pack faulty or damaged, faulty or improper coil signal connection,
improper signal from Crankshaft Position Sensor (CKP)
Given my
CMP and Coil packs are new, and the P0350 is coil pack related, but can be caused by
CKP issues, and both sensors do have a multi meter reading, more investigation is needed in the wiring I think.
Just need to get a laptop with a working battery so I can go for a drive and log some sensors, pity
CMP and
CKP aren't supported by ForScan.
Here's a snip of the logging on sensor values
